anima yume 工作流程

從 ModelTrends 匯入

(Updated to support Anima LoRAs!) The "AnimaYume" fine-tune (by duongve13112002) of Anima Base (v1) created by CircleStone Labs. It has a "Turbo" mode and a "Normal" (default) mode. This Workflow features optionally features a Turbo LoRA as well (also by CircleStone Labs) and is activated when using a CFG / Guidance of 1 (the default guidance is 3.0 if not set, meaning this lora won't be used). Note that this tends to have its own default style, unless you guide it elsewhere via your prompt. The left of the example image showcases "normal" vs "turbo" which is on the right. When using the "normal" mode (any CFG that isn't 1), a negative prompt is heavily recommended, even something like: "blurry, low quality, bad quality, censor bar, jpeg artifacts, sepia, ugly, deformed, watermark, logo, signature" As is usually the case, setting a CFG of 1 (to activate the turbo lora) will disable negative prompts. Adjusting step count is supported, however in the default normal mode, steps will always at minimum be 20, whereas the minimum for turbo mode is 8 steps. The workflow will toggle between 20 (normal) vs 8 steps (turbo) if left to the default. slot1 can also be used to adjust the sampler, using the following values below: 0 - er_sde 1 - euler_ancestral 2 - dpmpp_2m_sde_gpu 3 - res_2m (Default) 4 - res_multistep You can also use `/scale` to perform an automatic Tiled Hi-Res Fix upscale of the image, such as `/scale:2.0` - the `/strength` flag changes the "denoise" value of the upscal

查看方案與價格在 ModelTrends 下載工作流程在 ModelTrends 下載模型

支援 Graydient 技術的應用程式

Easy Creator (Prism) 網頁應用程式

專業工作室 (SpyGlass) 網頁應用程式

Discord 機器人 (Vector) Discord

Unified Editor 網頁應用程式

PirateDiffusion Telegram API 任何語言

選項

選項	映射至	預設
`(prompt)`	Prompt text	—
`/run:anima-yume`	Workflow shortcode	anima-yume

使用的模型

anima yume 模型由 ModelTrends 透過短碼 /run:anima-yume 匯入在 ModelTrends 查看

給開發者（可選）

API 範例程式碼。你可以用此工作流程建立個人使用的應用程式。準備部署時請升級為商業方案。詳見完整渲染 API 文件。

curl https://cloud.graydient.ai/api/v3/render/ \
  -X POST \
  -H "Content-Type: application/vnd.api+json" \
  -H "Accept: application/vnd.api+json" \
  -H "Authorization: Bearer $GRAYDIENT_TOKEN" \
  -d '{
    "prompt": "/workflow /run:anima-yume ",
    "callback_url": "https://example.com/webhook/render"
  }'

這是幕後運作方式。這已經為你設定好。上表中的參數會插入這些位置，讓你能改變運作方式及載入的模型。你不必理解或修改它——它已經能正常運作。

此工作流程頁列出短碼、選項及 ModelTrends 下載。完整節點圖可隨工作流程下載於 ModelTrends 取得。此頁尚未繪製此工作流程的節點圖。請在 ModelTrends 開啟以下載工作流程檔案及其載入的模型。

所有工作流程：強大的工作流程

查看方案與價格